Broken bridge aluminum shredder

【Motor Power】：2*11-2*90kw

【Production capacity】：2T/h-8T/h

【Discharge size】：The coarse crushing effect is determined by the number of tool claws

【Supporting equipment】：Broken bridge aluminum shredder host, feeding machine, vibrating screen, scrap aluminum crusher, eddy current sorting machine, dust collector, etc.

【Applicable materials】：The treatment of various waste aluminum materials such as broken bridge aluminum materials, waste aluminum alloy profiles, broken bridge aluminum door and window materials, waste aluminum profiles, and broken bridge aluminum scraps.

【Broken bridge aluminum shredder Price】：2w-18w

Telephone：13592521219

Product introduction
Working principle
Product advantage
Technical Parameter

01. Equipment

<a href='http://sjsx.com.cn/ssxl/1670.html' target='_blank'><span>斷橋鋁撕碎機</span></a>結構圖

The broken bridge aluminum shredder, also known as the broken bridge aluminum crushing and sorting machine, is a coarse crushing equipment for broken bridge aluminum materials. The equipment uses a reducer to reduce the motor power and provide torque. The shredding chamber generates shear force through the opposite rolling blade shaft, shredding a large amount of waste broken bridge aluminum materials into a certain size of waste aluminum blocks at once. Afterwards, further fine crushing treatment of the materials is carried out, and finally, sorting equipment such as eddy current sorting machine is used, Thoroughly separate and process the aluminum material.

The Broken Bridge Aluminum Tearing Machine is the first process equipment of the Broken Bridge Aluminum crushing, sorting, and recycling production line. This equipment can forcefully tear various aluminum plastic plates, aluminum wires, aluminum alloys, aluminum cans, aluminum plate scraps, aluminum scraps, cooked aluminum, aluminum slag, raw aluminum, aluminum ash, waste Broken Bridge Aluminum doors and windows, waste aluminum alloy, waste mold aluminum, waste PS board, and other aluminum containing materials. After the materials are crushed, they are sorted, and the sorting rate can reach between 90% and 96%, Suitable for crushing, separating, and screening various aluminum containing materials.

02. Working principle

<a href='http://sjsx.com.cn/ssxl/1670.html' target='_blank'><span>斷橋鋁撕碎機</span></a>生產線工藝

斷橋鋁撕碎機生產線工藝

1. The processed materials such as waste broken bridge aluminum or door and window dismantling materials are first roughly crushed, and the waste broken bridge material is cut into small sections through the broken bridge aluminum shredder for easy crushing into the crusher.

2. Put the material cut from the broken bridge aluminum into a crusher for crushing treatment. Crush the rubber strips and plastic sandwiched in the broken bridge aluminum to a separate state, and use a iron remover to remove iron from the mixed material of the broken aluminum and rubber strips.

3. Remove magnetic materials such as nails, buckles, handles, screws, etc. from it. The material after iron removal is subjected to a three-stage screening process through a linear sieve, with small materials ranging from 2mm to 1.5cm, medium materials ranging from 1.5cm to 3.5cm, and large materials ranging from 3.5cm to 20cm, usually within 10cm. This is because aluminum and rubber cannot be completely separated when the material is too crushed. The screened material is classified according to its diameter and then enters the vortex separator.

4. A general eddy current sorting machine can sort aluminum with a diameter of 2mm to 5mm, which is ejected from the material through the sorting machine and the plastic strip falls under the equipment.

03. Equipment advantages

1. The blade of the bridge cutting aluminum shredder is made of high-strength alloy steel, with good strength and high toughness, and high cutting performance. The blade has four cutting edges, which can rotate 90 ° after wear. It can be used again, and the blade thickness is 200mm (customizable);

2. The reducer adopts a hard tooth surface reducer, which has high transmission efficiency, high tearing torque, low equipment speed, stable and adjustable speed, low noise, and large and uniform propulsion force;

3. The entire production line is designed with high tearing power, uniform discharge, and easy maintenance.

4. Throughout the production process, physical decomposition and separation are used, without chemical reagents or incineration, which will not cause secondary pollution.

5. Shuangxing Machinery is a manufacturer of broken bridge aluminum shredders, with equipment sourced from physical manufacturers and no agents or intermediaries.